What you need to know before starting?
1. shutting off the Kirby vacuum cleaner and unplugging it from the outlet.
2. removing the screws that hold the bottom cover in place.
3. taking off the bottom cover and locating the brush roll.
4. removing the old belt from the brush roll and replacing it with a new one.
5. putting the bottom cover back on and screwing it in place.
6. plugging the vacuum back in and turning it on to test it out.
How to change the belt on your Kirby vacuum cleaner?
If the brushroll on your Kirby vacuum isn't spinning, it's probably time to change the belt. Luckily, this is a pretty simple process that you can do at home in just a few minutes. Here's how:
1. Unplug the Wet&Dry vacuum cleaner and turn it over so that you can access the bottom plate.
2. Unscrew the two screws that hold the bottom plate in place and remove it.
3. Locate the belt around the brushroll and pulleys and gently remove it. Be careful not to damage any of the components as you do this.
4. Replace the old belt with a new one, making sure that it is properly positioned around all of the pulleys.
5. Screw the bottom plate back into place and plug in the vacuum. Test it out to make sure that the brushroll is spinning correctly.
image source: https://www.pinterest.ph
Common mistakes people make when changing their Kirby vacuum belts
One of the most common mistakes people make when changing their Kirby vacuum belts is not properly aligning the new belt with the pulleys. If the belt is not properly aligned, it can cause the vacuum to run inefficiently or even damage the vacuum. Another mistake people make is not tensioning the belt correctly. The belt should be tight enough that it doesn't slip, but not so tight that it puts unnecessary strain on the Canister vacuum cleaner. Finally, people often forget to clean the area around the pulleys before installing the new belt, which can lead to dirt and debris getting caught in the belt and damaging it.
image source: https://www.pinterest.ph
Conclusion
If you have followed the Vacuum cleaner Supplier given steps above, you should now know how to change the belt on your Kirby vacuum cleaner. We hope that this article has been helpful and that you can now keep your vacuum running smoothly. Thank you for reading!
