menu
arrow_back
2023 Newest Fortinet NSE7_EFW-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Regualer Update
NSE7_EFW-6.4 Regualer Update,NSE7_EFW-6.4 Valid Practice Materials,NSE7_EFW-6.4 Top Dumps,NSE7_EFW-6.4 Valid Learning Materials,NSE7_EFW-6.4 Reliable Test Sample, 2023 Newest Fortinet NSE7_EFW-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Regualer Update

2023 Latest Pass4suresVCE NSE7_EFW-6.4 PDF Dumps and NSE7_EFW-6.4 Exam Engine Free Share: https://drive.google.com/open?id=1zXes38vA_rwbNi8phZlUx7QMKHsLFfZY

The Fortinet NSE 7 - Enterprise Firewall 6.4 certification exam is one of the top-rated career advancement NSE7_EFW-6.4 certifications in the market. This Fortinet NSE 7 - Enterprise Firewall 6.4 certification exam has been inspiring candidates since its beginning. Over this long period, thousands of Fortinet NSE 7 - Enterprise Firewall 6.4 exam candidates have passed their NSE7_EFW-6.4 Certification Exam and now they are doing jobs in the world's top brands.

Introduction to Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam

This exam is part of the preparation for the NSE 7 certification exam. The Fortinet Network Security Architect designation identifies your advanced skills in deploying, administering, and troubleshooting Fortinet security solutions. We recommend this certification for network and security professionals who are involved in the advanced administration and support of security infrastructures using Fortinet solutions. Visit the Fortinet NSE Certification Program page for information about certification requirements. You must pass a minimum of two Fortinet NSE 7 certification tests successfully:

  • Fortinet NSE 7 - Cloud Security
  • Fortinet NSE 7 - Enterprise Firewall
  • Fortinet NSE 7 - Enterprise Firewall 6.4 NSE7 EFW-6.4 exam test

The NSE 7 Network Security Architect designation recognizes your advanced skills and ability to deploy, administer, and troubleshoot Fortinet security solutions. To obtain certification, you must pass at least one Fortinet NSE 7 exam. NSE 7 certification is valid for two years from the date of completion. you will learn how FortiGate, FortiAP, FortiSwitch, and FortiAuthenticator enable secure connectivity over wired and wireless networks. You will also learn how to provision, administer, and monitor FortiAP and FortiSwitch devices using FortiManager. This course covers the deployment, integration, and troubleshooting of advanced authentication scenarios, as well as best practices for securely connecting wireless and wired users. You will learn how to keep the network secure by leveraging Fortinet Security Fabric integration between FortiGate, FortiSwitch, FortiAP, and FortiAnalyzer to automatically quarantine risky and compromised devices using IOC triggers.

This exam is recommended for professionals who want to expand their security knowledge in a networked environment. Candidates must have basic knowledge of security technologies and concepts before taking the exam. The exam tests the candidate’s knowledge and understanding of the latest features, functions, and technologies of the Enterprise Firewall 6.4 version.

>> NSE7_EFW-6.4 Regualer Update <<

NSE7_EFW-6.4 Regualer Update Exam Pass Once Try | Fortinet NSE7_EFW-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4

If you have bad mood in your test every time you should choose our Soft test engine or App test engine of NSE7_EFW-6.4 dumps torrent materials. Both of these two versions have one function is simulating the real test scene. You can set timed exam and practice many times. You can feel exam pace and hold time to test with our Fortinet NSE7_EFW-6.4 Dumps Torrent. You should take advantage of the time and opportunities you have to do the things you want. Our NSE7_EFW-6.4 dumps torrent files provide you to keep good mood for the test.

The Fortinet NSE7_EFW-6.4 certification exam is designed for experienced security professionals who have a deep understanding of network security concepts, firewall technologies, and Fortinet security products. The exam is vendor-neutral and covers a broad range of topics related to network security, including threat detection and mitigation, intrusion prevention, and advanced malware protection.

Fortinet NSE 7 - Enterprise Firewall 6.4 Sample Questions (Q115-Q120):

NEW QUESTION # 115
Refer to exhibit, which contains the output of a BGP debug command.

Which statement explains why the state of the 10.200.3.1 peer is Connect?

  • A. The TCP session to 10.200.3.1 has not completed the three-way handshake.
  • B. The local router is receiving BGP keepalives from the remote peer, but the local peer has not received the OpenConfirm yet.
  • C. The local router is receiving the BGP keepalives from the peer, but it has not received a BGP prefix yet.
  • D. The local router has received the BGP prefixes from the remote peer.

Answer: A

Explanation:
BGP neighbor states and how they change: * Idle: Initial state * Connect: Waiting for a successful three-way TCP connection * Active: Unable to establish the TCP session * OpenSent: Waiting for an OPEN message from the peer * OpenConfirm: Waiting for the keepalive message from the peer * Established: Peers have successfully exchanged OPEN and keepalive messages


NEW QUESTION # 116
Examine the IPsec configuration shown in the exhibit; then answer the question below.

An administrator wants to monitor the VPN by enabling theIKE real time debug using these commands:
diagnose vpn ike log-filter src-addr4 10.0.10.1
diagnose debug application ike -1
diagnose debug enable
The VPN is currently up, there is no traffic crossing the tunnel and DPD packets are beinginterchanged between both IPsec gateways. However, the IKE real time debug does NOT show any output. Why isn't there any output?

  • A. The log-filter setting is set incorrectly. The VPN's traffic does not match this filter.
  • B. The IKE real time debug shows error messages only. If it does not provide any output, it indicates that the tunnel is operating normally.
  • C. The IKE real time shows the phases 1 and 2 negotiations only. It does not show any more output once the tunnel is up.
  • D. The IKE real time debug shows the phase 1 negotiation only. For information after that, the administrator must use the IPsec real time debug instead: diagnose debug application ipsec -1.

Answer: A


NEW QUESTION # 117
View the following FortiGate configuration.

All traffic to the Internet currently egresses from port1. The exhibit shows partial session information for Internet traffic from a user on the internal network:

If the priority on route ID 1 were changed from 5 to 20, what would happen to traffic matching that user's session?

  • A. The session would be deleted, so the client would need to start a new session.
  • B. The session would remain in the session table, and its traffic would start to egress from port2.
  • C. The session would remain in the session table, but its traffic would now egress from both port1 and port2.
  • D. The session would remain in the session table, and its traffic would still egress from port1.

Answer: D

Explanation:
http://kb.fortinet.com/kb/documentLink.do?externalID=FD40943


NEW QUESTION # 118
Which two tasks are automated using the Install Wizard on FortiManager? (Choose two.)

  • A. Add devices to FortiManager.
  • B. Preview pending configuration changes for managed devices.
  • C. Import policy packages from managed devices.
  • D. Import interface mappings from managed devices.
  • E. Install configuration changes to managed devices.

Answer: B,E

Explanation:
https://help.fortinet.com/fmgr/50hlp/56/5-6-2/FortiManager_Admin_Guide/1000_Device%20Manager/1200_install_to%20devices/0400_Install%20wizard-device%20settings.htm There are 4 main wizards: Add Device: is used to add devices to central management and import their configurations.
Install: is used to install configuration changes from Device Manager or Policies & Objects to the managed devices. It allows you to preview the changes and, if the administrator doesn't agree with the changes, cancel and modify them.
Import policy: is used to import interface mapping, policy database, and objects associated with the managed devices into a policy package under the Policy & Object tab. It runs with the Add Device wizard by default and may be run at any time from the managed device list.
Re-install policy: is used to perform a quick install of the policy package. It doesn't give the ability to preview the changes that will be installed to the managed device.


NEW QUESTION # 119
The CLI command set intelligent-mode <enable | disable> controls the IPS engine's adaptivescanning behavior. Which of the following statements describes IPS adaptive scanning?

  • A. Downloads signatures on demand from FDS based on scanning requirements.
  • B. Determines the optimal number of IPS engines required based on system load.
  • C. Determines when it is secure enough to stop scanning session traffic.
  • D. Choose a matching algorithm based on available memory and the type of inspection being performed.

Answer: C

Explanation:
Explanation
Configuring IPS intelligenceStarting with FortiOS 5.2,intelligent-mode is a new adaptive detection method. This command is enabled the default and it means that the IPS engine will perform adaptive scanning so that, for some traffic, the FortiGate can quickly finish scanning and offload the traffic to NPU orkernel. It is a balanced method which could cover all known exploits. When disabled, the IPS engine scans every single byte.
config ips globalset intelligent-mode {enable|disable}


NEW QUESTION # 120
......

NSE7_EFW-6.4 Valid Practice Materials: https://www.pass4suresvce.com/NSE7_EFW-6.4-pass4sure-vce-dumps.html

P.S. Free 2023 Fortinet NSE7_EFW-6.4 dumps are available on Google Drive shared by Pass4suresVCE: https://drive.google.com/open?id=1zXes38vA_rwbNi8phZlUx7QMKHsLFfZY

keyboard_arrow_up