Hp Printer Not Printing Anything
Hp Printer Not Printing Anything

Hp Printer Not Printing Anything

HP printers are reliable and efficient machines that offer high-quality prints. However, sometimes, you may face issues where your “Hp Printer Not Printing Anything”. This can be frustrating, especially if you have urgent documents to print. But don't worry; we have compiled a list of steps to troubleshoot this problem.


Step 1: Check the Connections


The first step is to check the connections between the printer and the computer. Make sure that the printer is connected to the power source and turned on. Also, ensure that the USB or Ethernet cable is connected to both the printer and the computer correctly.


If you are using a wireless connection, make sure that your printer and computer are connected to the same network. If the connection is lost, try restarting both the printer and the computer.


Step 2: Check Ink Levels and Cartridges


Sometimes, the printer may not print anything because the ink levels are low, or the cartridges are empty. Check the ink levels by opening the HP Printer Assistant or HP Solution Center. If the ink levels are low, replace the cartridges and try printing again.


Step 3: Run the HP Print and Scan Doctor


HP Print and Scan Doctor is a free tool provided by HP to troubleshoot printing and scanning issues. Download and install the HP Print and Scan Doctor on your computer. Open the tool and follow the on-screen instructions to diagnose and fix any printing issues.


Step 4: Clear the Print Queue


Sometimes, a stuck print job in the print queue can prevent the printer from printing. Clear the print queue by following these steps:


  • Open the Control Panel on your computer.

  • Click on Devices and Printers.

  • Right-click on your printer and select See what's printing.

  • Click on Printer and select Cancel All Documents.

  • Confirm the action and close the print queue window.

  • Try printing again to see if the issue has been resolved.


Step 5: Update Printer Drivers


Outdated printer drivers can cause printing issues. Make sure that you have the latest printer drivers installed. Go to the HP website and download the latest drivers for your printer model. Install the drivers and restart your computer.


Step 6: Disable Antivirus and Firewall


Sometimes, your antivirus or firewall can interfere with your printer's functionality. Temporarily disable your antivirus and firewall and try printing again. If the issue is resolved, add your printer as an exception in the antivirus and firewall settings.


Step 7: Reset the Printer


If none of the above steps work, reset your printer to its default settings. Follow these steps to reset your printer:


  • Turn off your printer.

  • Disconnect the power cord from the back of the printer.

  • Wait for 60 seconds.

  • Reconnect the power cord to the printer.

  • Turn on the printer.

  • Wait for the printer to warm up and try printing again.


Step 8: Contact HP Support


If you have followed all the above steps and still cannot print anything, it's time to contact HP support. Go to the HP website and navigate to the support section. Select your printer model and follow the on-screen instructions to get in touch with HP support.




If your “Hp Printer Not Printing Black And White Color”, there could be several reasons behind it. By following the above steps, you can troubleshoot the issue and resolve it. In case you are still facing issues, don't hesitate to contact HP support. With a little bit of patience and effort, you can get your printer back up and running in no time.